Axle Adjusters, Bus / Camper 68-79, Each (CSP)

These German-made CSP Axle Adjusters, once fitted, will allow your existing stock height bus axle beam to be adjustable to suit different ride heights. With small teeth to allow for minor incremental adjustment, these are superb for lowering your bus to the exact height you require.

The adjusters need to be welded to your axle, which will require removal of the beam from the vehicle. Two adjusters are required per vehicle, one for the top axle tube, and one for the lower.

Please note: Axle adjusters should always be fitted in pairs. We would also recommend that these items be fitted by somebody with good mechanical knowledge and welding skills. No instructions are supplied.

Other points of interest:
  • The adjusters replace the original centre grub screw on the beam, and allow it to be positioned as required, to change the ride height
  • Please note, you will need to change your front shock absorbers, to suit the new ride height of your bus
View the main product page for this item
 
Axle Adjusters, Bus / Camper 68-79, Each (CSP)
 
310.512.20 £59.50 Each (Including VAT) Wish Suggested quantity: 2
Associated Products
Anti-Roll Bar, Mounting Kit, Bus / Camper 68-79, Per Side
 
Anti-Roll Bar, Standard, Front, Bus / Camper 68-79
 
Axle Beam, Bump Stop Lock Plate, Bus / Camper 68-79
 
Axle Beam, Bump Stop, Lower, Bus / Camper 68-79, Each
 
Axle Beam, Bump Stop, Upper, Bus / Camper 68-79, Each
 
Ball Joint, Upper or Lower, Bus / Camper 68-79 (Meyle)